Heating Services

We offer maintenance, repair or replacements for domestic and commercial boiler & heating systems. Summit Pools and heating offer a high level of service. Our attention to detail is a priority throughout every project and our excellent aftercare ensures your boiler is maintained to the highest possible standard.

Boiler Replacements

So if you looking for a reliable, friendly and professional company who provide a high quality service, to replace your existing gas boiler, LPG boiler or oil boiler then call or email us now.

We install the best boilers currently available on the market and the materials we use are of the highest quality to ensure the best possible reliability is achieved.

We are accredited Valliant installer . This means our engineers have been on manufacturers courses to ensure we install the boilers correctly. It also means that we can offer better warranty periods than most other installers.

Before we install a new boiler, time is spent on a survey to establish what other works are required to help improve the efficiency and also reliability of the whole system. We also allow for a full powerflush to get the existing systems as clean as possible. Most other companies will not do this properly, leaving harmful sediment in the system. This work may cost more initially, but in the long term will save you money on fuel and also reduce or eliminate costly call outs to breakdowns.

We also provide a full maintenance service to continue caring for your system and new boiler, carrying out annual servicing and dealing with any problems that may arise.

Old boilers can be in-efficient in the way they convert fuel to heat, with some being less than 70% efficient. This means that every £1 you spend on fuel about 30p can be wasted. Modern day condensing boilers are over 90% efficient and can therefore have a considerable saving on fuel.

Old boilers and systems also have a lack of efficient controls. When installing new boilers, current building regulations require various controls are added to improve the efficiency of the system, thus also having a saving on the amount of fuel used to heat your heating and hot water.

Both new boilers and controls work together in saving fuel. Condensing boilers save fuel when creating heat and the controls save fuel by using the heat from the boiler in the most efficient way.

Boiler Servicing

We service your Gas LPG and Oil boilers
We can carry out boiler servicing of domestic gas, LPG and oil boilers including condensing, combination, conventional flue and room sealed, across Guildford & within Surrey.


There are 3 main reasons why you should service your boiler:
1. Carbon Monoxide PoisoningIf fuels such as gas or oil are burnt, carbon monoxide (CO) can be produced by poorly maintained or faulty appliances. It is vital that appliances are inspected and serviced to ensure they are working safely.
2. EfficiencySome of the checks carried out on a service are to ensure appliances are working to their maximum efficiency. This will help reduce annual fuel costs, saving you money.
3. ReliabilityRegular services help to identify any potential problems and therefore minimises breakdowns. Ideally boiler servicing should be carried out in the spring/summer months, so necessary work can be done when the boiler is least at use. Due to the nature of fuel burning appliances parts can sometimes become brittle and when carrying out servicing these parts may fail or break. This is not a fault of the service but a failure waiting to happen.
Types of boiler
We carry out inspections and servicing to all types of domestic gas, lpg and oil boilers including condensing, combination, conventional flue and room sealed. We also service warm air boilers and gas fires.

 

What’s included in the service
A visual check to ensure your boiler and flue still meets current standards
Boiler fired to identify any working faults
Boiler casing removed to check all main boiler components (burner, heat exchanger, main injector, spark/sensor probe).
Checks to ensure flue terminals are unobstructed and internal flue components are sealed properly
Inside casing surfaces cleaned
Main heat exchanger and boiler parts cleaned (not always necessary on condensing boilers)
Boiler casing seals inspected for integrity to ensure for adequate sealing
Gas working pressure test conducted to ensure that adequate gas is supplied to the appliance
Combustion readings checked and gas valve adjusted, if necessary, to ensure the burner is combusting efficiently and properly (normally using a flue gas analyser).

Any parts needed, such as new gaskets, may have to be ordered and are not included in the cost of the service.

Gas Safety Inspections

as safety inspections are a legal requirement for let properties, but they can also be a valuable process for any home to ensure all gas appliances are working safely and gas pipes are not leaking. To save money, have the safety inspection carried out with the annual boiler service, as the cost is reduced.

The following tests are carried out on each appliance:

  • Appliances have been correctly installed to meet current regulations
  • Gas appliances are on the right setting and burning correctly with the correct operating pressure
  • Harmful gases are being removed from the appliance safely to the air outside
  • That any ventilation routes are clear and working properly
  • All the safety devices are working and the appliance is safe to use

If you are a landlord, you have a legal requirement to:

■ Ensure gas fittings and flues are maintained in a safe condition. Gas appliances should be serviced in accordance with the manufacturer’s instructions. If these are not available it is recommended that they are serviced annually unless advised otherwise by a Gas Safe registered engineer;

■ Ensure an annual safety check is carried out on each gas appliance/flue. Before any new lease starts, you must make sure that these checks have been carried out within one year before the start of the lease date, unless the appliances in the property have been installed for less than 12 months, in which case they should be checked within 12 months of their installation date;

■ Have all installation, maintenance and safety checks carried out by a Gas Safe Registered engineer;

■ Keep a record of each safety check for at least two years;

■ Issue a copy of the latest safety check record to existing tenants within 28 days of the check being completed, or to any new tenant before they move in (in certain cases there is an option to display the record).

You should not assume that an annual service inspection meets the safety check requirement, or that a safety check will, on its own, be sufficient to provide effective maintenance.

Get a quote